DIY Chicken Waterer and Feeder from 5-gallon Buckets
on Apr 13, 2022, Updated Mar 27, 2024
This post may contain affiliate links. Please read our disclosure policy.
Spring is in the air, so it’s time to start preparing for backyard chickens! I will tell you everything you have ever wanted to know about Chicken Waterers and feeders and how to DIY your own from a 5-gallon bucket.
Providing animals with water to drink seems like a no-brainer, but there are many factors that go into watering chickens. For instance, how much water do chickens need, what type/material of waterer is best, how to keep the water clean, and how to DIY a simple and cost-efficient chicken waterer.
Appropriate access to clean water drastically influences how healthy a chicken is and how well it produces. If a chicken does not have ample water, they will stop laying eggs! Water also aids in the digestive process and helps a chicken eliminate waste.
When sufficiently hydrated, chickens can more effectively regulate their body temperature. A chicken that drinks clean, cool water also has a healthy brain. This will keep the animal in tip-top shape and its mind sharper to watch for predators.
And if they’re well-hydrated, they’ll keep laying those beautiful eggs for delicious meals like an egg and potato casserole, perfect for breakfast, lunch, or dinner.
Table of Contents
How Much Water Chickens Drink Per Day
It doesn’t seem like chickens drink much water because they just take small sips throughout the day. However, on average, a single chicken will drink about 1 pint of water daily. They will drink more if the temperature is hot.
Cool and Fresh Water, Please!
They also like cool, fresh water. If the water has been sitting out in the sun too long, hasn’t been refreshed regularly, or starts to get dirty from the chicken’s own doing, they may stop drinking. You don’t want a chicken that isn’t drinking, so remedy the issue quickly.
The process of chickens drinking water is fun to watch. Chickens use their tongue to push food to the back of their mouth to be swallowed, but that method doesn’t work for drinking.
If a chicken wants to drink water you will see them dip their beak into the water and rapidly tilt their head back to let the water drip down their throat. So you can imagine they can’t drink a whole bunch of water at once.
Tips for Keeping Chicken Water Fresh and Clean
Keeping the water you feed your chickens clean is essential.
- You should refresh their water daily to prevent bacteria buildup and algae forming.
- Sanitize the waterer at least weekly. Clean it with dish soap, a brush, or a diluted bleach solution.
- Place the water containers in shaded areas to prevent overheating and algae growth.
- Elevate the water containers off the ground to prevent dirt and droppings from getting into the water.
Project FAQs
Chickens typically do not need water at night. They sleep on their roosts until morning.
You want to place your waterers without direct sunlight to keep the water as cool as possible.
I plan for one large waterer per 6-8 chickens. Remember that each chicken will drink about 1 pint daily, so plan accordingly.
The general rule is that if it is safe enough for you to drink, your chickens can also drink it.
You will want to remedy the situation quickly if a chicken is dehydrated. When a chicken isn’t getting enough water, its egg-laying will slow down or stop completely. It will become lethargic, and you may notice it panting or having a pale comb.
DIY Chicken Waterer and Feeder From 5-Gallon Buckets
Chicken waterers can come in various shapes, sizes, and dollar amounts and can be constructed from various materials. In my experience, you don’t need to break the bank to provide water for chickens. Your chickens will thrive if they have clean, fresh water and lots of it.
We have used this DIY version for chicken waterers for years and have found great success.
Materials Needed for Chicken Feeder and Waterer
- Two 5-gallon buckets with lids
- Drill
- 1-inch standard drill bit or paddle drill bit
- Two large foil roasting pans
Where to Get Materials
Buckets: Find a free source for the buckets. They are everywhere, really! Just ask your local sandwich shop to save you a few that the pickles come in. Bakeries are also a good source for free buckets.
Pans: Pick them up at the dollar store for a few bucks, or get these large feed pans.
How to Make the DIY Chicken Feeder
- Clean and empty a bucket
- Drill 1-inch holes around the bottom edge, spacing the holes about 2 inches apart.
- Place the bucket inside the pan, right-side-up (holes in the pan), and then fill it with chicken feed. The feed will pour through the holes into the pan, and as the chicken eats, more will come out.
- Replace the lid to the bucket so the chickens can’t get to the food from the top. Easy!
How to Make the DIY Chicken Waterer
- Clean and empty the 5-gallon bucket.
- Along the bottom edge of the bucket, drill two 1-inch holes opposite of each other.
- Place the bucket inside the pan, right-side-up (holes in the pan), and then fill it with water.
- Replace the lid and make sure that it has an airtight seal.
This seal is key!! The water will stop coming out of the holes once the water covers the holes completely if the lid is airtight.
If there isn’t a good seal, the water will keep running out of the bucket and overflow the pan. It’s a hydrodynamics thing—just ask my water engineer husband; he’d gladly explain it to you!
How to Make a DIY Chicken Feeder and Waterer – Picture Tutorial
Sometimes life on the farm can be much simpler than we think, and this DIY chicken waterer and feeder from 5-gallon buckets is the perfect example. An easy and cheap way to provide an effective and reliable feed and watering system for your chickens.
If you’ve been bitten by the DIY spirit, you might try your hand at building a chicken coop for the little egg factory in your backyard. I believe happy chickens make more eggs!
Update: October 2017
I have been using these same buckets as a DIY chicken waterer and feeder for over 4 years, though I have upgraded from the foil turkey roaster pans. Those pans lasted about 6 weeks, but I was in it for the long haul.
I picked up some large (about 16 inches wide and 4 inches deep) round metal pans from our hardware store to replace the pans in these pictures. Similar pans are available on Amazon.
They cost me less than $10 each and have lasted 4 years. So for $20 total, instead of $2, I have a large feeder and waterer that I’ve used for years. They work great and I still highly recommend making these.
More Farm Fun!
Life on the Farm
Behind the Recipe Farm Update: Our First Honey Harvest!
Egg Recipes
How long do eggs last?
Life on the Farm
Easy Pumpkin Dog Treat Recipe
Did you try this project? Share it on Instagram, Facebook, and Pinterest!
We tried this tonight since our normal metal waterer developed a small hole and would no longer hold water. Luckily we had all necessary parts but will be upgrading the pan to something a bit wider than what we used (a planter base). Thanks for a great idea!!
We love you, too. I mean, thank you for these no nonsense instructions. God bless you all.
Thank you Melissa. What a great feeder and waterer for my chickens. Trinidad West Indies 2022.
Hello.that.5.gallon. Water. Is.great idea. Thank you very much.😁
Excellent idea it sure worked for me. I just change a little bit as far as the 5 Gallon bucket 🪣 I used a 2 gallon bucket since I only have 4 chickens 🐓… Thank you for your post and taking the time to post it so it would help someone else. Blessings
Thank you, was going away for 3 weeks and needed quick easy idea to feed chicks, already use a water bucket with overflow from shed guttering, so bucket fedding for me is ideal
Thanks for your post! I AM that person that needed a little guidance on a diy feeder! 😆 My brain just was not in the creative mode for it! So tha k you! I will post a picture when I am done!
Thank you . Just what I have been needing. Simple and cheap chicken waterer and feeder.
Hello Melissa
Thank your for all the work you have put into this blog. Your suggestions on the chicken feeder and water er are great. l have the feeder working now and will get the water er going as soon as I can find a bucket with tight lid. I have read a number of your posting and find them very inspiring. Don’t give up. There are some of us out here who really like what you are doing.
Mike In MS
To save flipping the bucket use a cork or something similar, a rag will do fine, and remove once in the drinking tray, I used a metal tray rather than foil, remember fresh water daily is best but this is great for a backup or weekend away.
I made the feeder but they get the food everywhere on the ground. I guess I need to put it up higher which I didn’t do because I have chickens of every size.
Love this idea. Went to lowes and got a bucket with a screw off portion, the sealed, got the matching bucket.. then went to Tractor supply and got a hog feeder for the bucket to sit in…came home drilled holes, pounded the lid on, and filled it..the girls love it.
for Waterer i prefer holes in the top of bucket. I have to turn it upside down, but it is much easier to carry water
The waterer would work well if I could keep the damn water in it when filling.
It overflows the pan and can’t get it full, because it’s wants to overflow the pan before I can get the lid on.
This is not a very good idea.